Finding a reliable PCB mount terminal block manufacturer in China takes more than a search — you need a factory that reads your specification accurately, holds consistency across production batches, and ships with clean documentation every time.
Lupu is a factory-direct PCB mount screw terminal block manufacturer based in China. Since 2017, we have supplied custom PCB mount terminal blocks to buyers across 30+ countries — in 2-pin through 24-pin configurations, with pitch options from 2.54mm to 10mm including standard 5mm pitch PCB mount screw terminal blocks.
Whether your application requires tool-free wiring, field-serviceable connections or high-density signal interfaces, our factory produces all four major PCB mount terminal connection types — CE and CQC certified, available in standard and OEM configurations.
A selection of standard and custom PCB mount terminal block products from our current range. Each entry shows pitch, pole count, certification and typical application.
Chinese PCB mount terminal block manufacturers now meet international CE and CQC certification standards — at 30–50% lower unit cost than European or North American suppliers. Here is what makes sourcing from China the right move for terminal block buyers worldwide.
Tooling, injection moulding, plating, assembly and quality inspection are all handled in-house. No subcontracting means tighter process control and faster turnaround on PCB mount screw terminal block orders of any volume.
Our PCB mount terminal block connector products carry CE certification for the European market and CQC certification for Chinese compliance — with ISO 9001:2015 quality management across all production. Your regulatory paperwork is already covered.
From 2.54mm signal-level terminal block PCB mount configurations through to 5mm pitch PCB mount screw terminal blocks for power applications — and 2-pin through 24-pin pole counts — one factory covers your entire BOM for PCB mount terminal connectors.
Private label PCB mount terminal blocks with your brand, custom housing colours, modified pitch or non-standard pole counts. Mould development is handled in-house with no third-party toolmaker delays.
Not all PCB mount terminal block suppliers offer the same combination of certification, customisation and cost. Here is how a dedicated China PCB mount screw terminal block manufacturer compares against other common sourcing options — so you can make the decision with full information.
Our PCB mount screw terminal blocks and PCB mount terminal block connectors are used wherever a reliable, serviceable connection to a circuit board is required. From 2-pin signal connectors to multi-pole 5mm pitch PCB mount screw terminal blocks for power distribution — here is who buys them and why.
Automation equipment manufacturers specifying PCB mount screw terminal blocks for field wiring interfaces on PLCs, motor drives and I/O modules. Typically 5mm pitch, 4–12 pin configurations.
Medical device OEMs requiring CE-certified PCB mount terminal block connectors with consistent contact resistance and reliable mechanical retention across every production batch.
Power supply manufacturers sourcing high current 5mm pitch PCB mount screw terminal blocks for mains input and output connections. Rated for 300V–600V depending on configuration.
Telecoms equipment designers specifying small-pitch terminal block PCB mount connectors for internal board-to-board and board-to-cable signal interfaces. 2.54mm and 3.5mm pitch most common.
Building management system manufacturers using PCB mount terminal blocks for sensor, actuator and power wiring on controller boards. Require robust screw clamp retention for field installation.
Electronics distributors and trading companies sourcing CE-certified PCB mount screw terminal block ranges for resale — standard and custom configurations with OEM branding available.
Pricing for PCB mount screw terminal blocks from a China factory depends on four factors: pitch size, pole count, order volume and certification requirement. The table below gives indicative unit price ranges based on current production costs — submit your specification for an exact quote within 24 hours.
| Product type | Pitch | Pole count | MOQ (pcs) | Sample unit price | Bulk unit price (1,000+ pcs) |
|---|---|---|---|---|---|
| Standard PCB mount screw terminal | 5.0mm | 2–3 pin | 500 | $0.08–$0.15 | Contact us for quote |
| 5mm pitch PCB mount screw terminal block | 5.0mm | 4–6 pin | 500 | $0.12–$0.22 | Contact us for quote |
| PCB mount terminal block connector | 3.5 / 3.81mm | 2–12 pin | 1,000 | $0.10–$0.20 | Contact us for quote |
| Small pitch PCB mount terminal | 2.54mm | 2–10 pin | 1,000 | $0.06–$0.12 | Contact us for quote |
| High current PCB mount terminal | 7.5 / 10mm | 2–6 pin | 500 | $0.18–$0.35 | Contact us for quote |
| OEM / custom configuration | Custom | Custom | Negotiable | Based on specification | Contact us for quote |
Send us your specification or BOM — we confirm product availability, CE certification status and pricing within 24 hours.
 (1)_1776841595_WNo_945d945.jpg)
 (1)_1776841704_WNo_1024d1024.jpg)
 (1)_1776841720_WNo_800d800.jpg)